Multi-Purpose Drill Press Vise / Bench Vise
Versatile, Multi-Purpose Drill Press / Bench Vise Comes With Mounting Hardware for Your Mark 7 / Mark V Work Table
Occasionally, a product comes along that's so handy, it's tough to do without. This is one of those products. Most vises that are worth their salt can cost upwards of $100, and then, all you usually get is either a bench vise or a drill press vise.
However, with this one vise, you get both. As a drill press vise, it mounts directly to the miter gauge slots in your Mark 7 or Mark V work table with two sliding t-nuts, button-head bolts and fender washers (included).
You'll reach for it whenever you need to hold workpieces for drilling or routing operations. As a bench vise, you can clamp it onto any surface up to 2-1/2" thick in a vertical, horizontal, 45° or even upside-down position to hold any object up to its 4" jaw opening.
Each 1-3/8" h x 3-7/8" w jaw features both vertical and horizontal v-slots for gripping round or odd-shaped objects. Just depress the quick-release button on top and the movable jaw slides open in a single, quick action.
Features
- Quick-Release Jaws
- Drill Press or Bench Mount
- Rugged Steel and Aluminum Construction
- A Must-Have Accessory
Includes: • Vise • Bench Clamp • (2) Sliding T-Nuts • (2) Button-head bolts • (2) Fender washers for Mark 7 or Mark V mounting.
Note: For Mark 7 and Mark V Models 505, 510 and 520 only.
On Bench
Off Bench
45° Angle
90° Angle
555994 Multi-Purpose Drill Press / Bench Vise ... $50.70
Other Items You May Need
3-Lever Drill Press Handle
3-lever drill press quill handle improves leverage, control and convenience.
Flip-Up Eurogaurd
EuroGuard delivers fast, hassle-free tool changeovers, improved dust collection efficiency and added workshop safety.
Order Toll-Free by Phone, if you prefer -- 1-800-543-7586
Copyright © 2012 Shopsmith All rights reserved.
