Shopsmith Router Package -- Youíll find dozens of ways to
use this versatile package
woodworkers know ó the router is one of the most versatile
of all power tools. Use it to create a variety of strong,
attractive joints like sliding dovetails, rabbets and dadoes;
to hollow-out boxes, trays and similar projects; to add decorative
edges to furniture or architectural moldings; even to create
freehand designs for signs, wall plaques and crafts projects
of all types. The list goes on.
With a few limitations, the Shopsmith Router Package will
perform all of these operations. It just does them a bit differently.
First of all, itís used with the MARK V in the Drill Press
mode of operation.
The 1/2-inch shaft Router Bits slip into a special 1/2-inch
Router Chuck, which attaches directly to the MARK V Spindle.
The moving Bit remains in the same place while the workpiece
is moved through the cut.
When Routing with this MARK V setup, youíll enjoy a much better
view of the work in progress than with a hand-held router
or router table. A see-through Shield protects your eyes from
flying dust and chips and keeps your fingers out of harmís
Plus -- with this setup, youíll also be able
to use your MARK Vís Rip Fence and Miter Gauge when performing
repetitive cuts with or across the grain.
The Shopsmith Routing Package includes: The 1/2-inch
Router Chuck and Shield, a
1/4-inch Straight Router Bit, a 3/8-inch Straight Router Bit,
a 1/2-inch Staright Router Bit, a 3/4-inch Straight Router
Bit, and a 1/2-inch Dovetail Router Bit (all High Speed
Shopsmith Routing Package
need individual pieces for your shop?