Shopsmith Pro Fence Router Table System
Enjoy Unrivaled Precision and Dust Collection Efficiency With Our Micro-Adjustable, Two-Piece Pro Fence Router Table System
Table Surface
Accepting virtually any hand-held router motor, it can be used as a "floating table" between your work table and extension table or as an outboard unit, supported by your extension table and telescoping tegs.
Made of 1-1/4" thick double-refined MDF (medium density fiberboard), all surfaces are laminate-covered for durability and smooth-gliding action.
Mounting Plate
The patented Woodhaven mounting plate comes with a blank insert... a 2" hole insert... a 1" hole insert with a 1-3/16" diameter bushing counterbore and a 1/2" diameter nylon starting pin.
Complete with instructions and mounting hole diagrams for 37 popular router motors.
The plate is supported by four, Woodhaven Stay-True Plate Levelers™ that can be adjusted to provide snag-free gliding action.
Adjustable Fences
Each of the two rugged, extruded aluminum fences mount quickly and independently with twin knobs to the T-Track in the top of your Pro Fence System rip fence.
Each fence offers more than enough left/right travel to provide the ideal bit clearance for optimal workpiece support... whether you're working with a 1/8" diameter straight bit or a giant 3" or larger diameter panel-raising bit.
The in-out position of each fence half is controlled by turning a large, four-wing adjustment knob. Each 1/4-turn provides a precise, 1/128" of micro-adjustment.
Connect the vacuum port on either half of the fence to a 2-1/2" diameter hose for super-efficient dust-collection. A 2-1/2" elbow is included (and required) for attaching the hose to either of these ports. For even greater efficiency, order an additional, optional elbow and connect a dust collector hose to each fence end.
A shatter-resistant, see-through upper guard provides eye protection and helps seal off the gap between the two fences for added dust collection efficiency.
Note: This large, 20" x 21-3/4" router table is designed to work only with Mark 7's and Mark V model 520 pro fence systems.
Shopsmith Tools in Action - Online Videos
Decorative Splines For Mitered Corners
Routing Small Dadoes and Grooves
Coping and Sticking Joints In Curved Doors
Routing Finger Joints
Routing Stopped Joints
Optional Accessories for the Pro Fence Router Table System
Click here for more information about optional accessories for the Pro Fence Router Table System
555865 Pro Fence Router Table System ... $539.99
555995 Router Table ...
$345.65
(Item may be on backorder or is made upon ordering)
521963 Router Fence ...
$304.88
(Item may be on backorder or is made upon ordering)
Product Reviews
Currently no reviews - you can be the first to review this item
Order Toll-Free by Phone, if you prefer -- 1-800-543-7586
Copyright © 2012 Shopsmith All rights reserved.
