|
The
Shopsmith Hollow Chisel Mortising Attachment
A.
Mortising Hold-Down
Attaches
to the Rip Fence of your MARK V (Model 500, 510 or 520) to
keep your workpiece from lifting when the Bit/Chisel set is
withdrawn.
B. Mortising Attachment
Attaches to your MARK V’s Quill to hold and prevent the
Mortising Chisel from turning while the bit inside removes
the majority of the stock from the mortise.
C. Mortising Bit/Chisel Sets
Precision ground to produce sharp, clean square holes
and mortises.
Mortising Chisel Honing Stone (Not shown)
Hollow chisel mortising requires a great deal of downward
pressure to shave the sides of the mortise smooth and true.
That’s why it is extremely important that all four edges of
the hollow chisel be kept as sharp as possible. This precision-molded
stone has been made specifically for this purpose. The Mortising
Chisel Honing Stone is a 50-degree stone for your 1/4-inch,
3/8-inch and 1/2-inch chisel.
|
521900
Mortising Hold Down
Price $43.35
Status: Item
may be on BACK-ORDER, or is made upon ordering.
Please call 1-800-543-7586
if you have any questions.
|
|
|
521901
Mortising Attachment
Price $49.86
Status: Quantity is low.
|
|
|
521882
1/4-inch Bit/Chisel Set
Price $28.27
Status: Item is available.
|
|
|
521883
3/8-inch Bit/Chisel Set
Price $30.27
Status: Item is available.
|
|
|
521884
1/2-inch Bit/Chisel Set
Price $32.37
Status: Item is available.
|
|
|
521902
Mortising Chisel Honing Stone
Price $7.34
Status: Item is available.
|
|
|
513549
Mortising Chisel Honing Stone - Pre
1990.
For 1/4" and 3/8" Mortising Chisels 41°
Stone.
Price $5.93
Status: Item is available.
|
|
|
513550
Mortising Chisel Honing Stone - Pre
1990.
For 1/2" Mortising Chisels 46.5° Stone.
Price $3.97
Status: Item is available.
|
|
|
|
|
