Jointer Feather Guard Upgrade Installation Kit PART #555559

Give Your Jointer a Makeover to Expand Your Capabilities or Stay in Tip Top Shape

$18.72

-
+

-

(0 Customer Reviews)

Install Your Jointer Feather Guard Upgrade Fast and Easy with the Shopsmith Jointer Feather Guard Installation Kit

LEARN MORE

Jointer Feather Guard Upgrade Installation Kit Includes:

  • (1) #3 drill bit
  • (1) 1/4-28 tap
  • (1) tap handle for installing the Jointer Featherguard
LEARN MORE

The Can't Miss Details

Expand Your Capabilities with the Jointer Feather Guard Upgrade. (555480) This is the third hand you need on your Jointer.

The Feather Guard holds the stock against the fence as you push it over the cutterhead. Increases safety - since this Upgrade was introduced in 1990, accidents have been curtailed significantly. Additionally, this guard can be adjusted to hold workpieces firmly again Your fence, increasing the accuracy of Your Cut.

For Shopsmith Jointers with aluminum Blade Guards. Dual-purpose Guard covers rotating knives to keep hands out of harm's way. Single knob adjusts featherboard tension to hold workpiece against Jointer fence for more precise cuts.

Note: You may need to purchase the Jointer Feather Guard Upgrade Installation Kit (555559).

Install Your Jointer Feather Guard Upgrade Fast and Easy with the Shopsmith Jointer Feather Guard Installation Kit. (555559)
The Feather Guard Upgrade Installation Kit Includes:
• (1) #3 drill bit
• (1) 1/4-28 tap
• (1) tap handle for installing the Jointer Feather Guard

Note: If you already own these tools, you will not need to purchase the Jointer Feather Guard Installation Kit.

Jointer Chip Chute Upgrade Kit Collects Shavings at the Source (555077)
Keep Your Tools and Workshop Clean with Jointer Chip Chute Upgrade Kit. It collects shavings at the source keeping them off the floor and from under Your feet. Update older Shopsmith Jointers for improved dust collection.

Jointer Chip Chute Upgrade Kit Includes*:
• Rear Blade Guard
• Inner Guards
• Chip Chute
*Some drilling and tapping required.

Note: For Shopsmith Jointers with serial numbers prior to 70,000.

Jointer Chip Chute Assembly may fit Your needs if you already have the Rear Blade Guide and Inner Guard (513944)

Jointer Complete Auxiliary Fence Package (555655)
Jointer Complete Auxiliary Fence Package helps you work safer and with improved stability. This 7 3/4" high Fence attaches quickly to your Jointer or MARK V Rip Fence and offers a smooth-gliding, laminate-covered surface. Use it for added support when working with wide boards. Also accommodates two Featherboard hold-downs for increased safety when jointing narrow, difficult-to-hold boards.

Jointer Complete 7 3/4" high Auxiliary Fence Package Includes: 2 Featherboards.

Jointer Complete 7 3/4" high Auxiliary Fence (Fence Only) (555653)
Add a Tall Fence for Control of Wide Boards.

Jointer Featherboards (2 Pack) (555654)
Jointer Featherboards mount to the Auxiliary Fence while using on your Shopsmith Jointer. They help to hold your workpiece in place during your jointing operation.

Jointer Featherboards (2 Pack) includes two Featherboards and the necessary hardware to mount them on the fence.
Part NumberNameSpecifications
555559Jointer Feather Guard Upgrade Installation KitJointer Feather Guard Upgrade Installation Kit Includes:
• (1) #3 drill bit
• (1) 1/4-28 tap
• (1) tap handle for installing the Jointer Featherguard

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

warranty-sticker
SHOPSMITH LIMITED LIFETIME WARRANTY A Legacy Of Quality & Satisfaction Since 1953! Warranty applies ONLY to Original Shopsmith Purchaser. Purchaser is responsible for shipping costs from the outside the United States or from Alaska and Hawaii. View additional information about our warranty.
shipping-sticker
RETURNS & SHIPPING Use any product for a full 30 days. Make as many projects as you would like to be completely satisfied that the product gives the performance you expect. If by chance you are not satisfied, you can return the product within 30 days. No questions asked. View additional information about returns. Normal item shipped via UPS Groud or USPS View additional shipping information.

Shopsmith Owner Testimonials

My MARK 7 is not only a space saver — it's a life saver, time saver, and money saver.

- Kent Bradshaw, Owner Since 1974

Let Us Build You a Shopsmith Today

With more than 600,000+ Owners, Shopsmith is the #1 Multi-Purpose Woodworking Equipment provider in the Unites States. We offer one of the best warranties in the business, plus, our Customer Care team takes great pride in supporting our Owners. We believe Owners should be able to connect with a live person, not a machine.

NEED HELP OR WANT TO ORDER BY PHONE?
Call Shopsmith U.S-Based Customer Care 1-937-890-5197. Support hours are Monday-Friday from 8:30am to 4:30pm.
Email Customer Care at info@shopsmith.com.
Jointer Feather Guard Upgrade Installation Kit 555559

$18.72Add to cart