Critical MARK V Alignments DVD/DVD-ROM FROM SHOPSMITH & NICK ENGLER
Order this 68-minute video and pick up loads of great of techniques on how to align your Shopsmith MARK V for optimal performance and improved woodworking results
Here’s a fantastic HOW-TO video from Nick Engler that shows you, step-by-step
how to align your MARK V’s major components quickly and easily so you can
achieve the very best results on all of your projects. No more fiddling around…
no more guesswork. Just the facts !
Here’s what you’ll learn in these four, fail-safe sessions:
How to align the main Worktable with the Sawblade Since most projects
begin with sawing your workpieces to size, this is the most important of all
alignments. In this segment, you’ll learn how to set your Worktable Miter
Gauge slots to be parallel with the axis of rotation of your sawblades.
How to align the Miter Gauge & Rip Fence to the Worktable Miter Gauge slots In this segment, Nick
shows you how to be sure your Rip Fence is parallel with these slots…and your Miter Gauge face is perpendicular to them. He also shows you how to set the two 450 stops on your Miter Gauge.
How to align the Worktable with the Drill Chuck In this segment, you’ll learn how to be certain that your Drill Chuck is aligned perfectly with the Worktable surface…both front-to-back – and left-to-right. Only be doing this, can you be sure that the holes you drill, grooves you rout, edges you Drum Sand and more are at the desired angle to your workpiece surfaces and edges.
How to align your Floating Tables and Extension Table Since your Rip Fence can be used on these Tables as well as your Main Worktable, it is critical that they be in perfect alignment with the Main Worktable. In this segment, Nick shows you how to make the adjustments that will ensure the precision of your rip cuts and other operations that may rely on the accurate positioning of your MARK V Rip Fence.
Critical MARK V Alignments DVD/DVD-ROM
may be on BACK-ORDER, or is made upon ordering.
Please call 1-937-890-5197
if you have any questions.
Back to video index