Shopsmith Utility Light
Illuminate Your View of Virtually Any Woodworking Operation
Shopsmith Utility Light
These handy utility lights feature a bright conical reflector that will focus loads of light exactly where you need it for ensuring the optimum in precision for tasks of all types. Their tough, Lexan shades are designed specifically to withstand the heat generated by incandescent bulbs of up to 100 watts as well as the impact of accidental drops onto the shop floor.
Each lamp comes with a convenient 6-foot cord, a flexible gooseneck that twists and turns in any position for focusing on your task (and staying where you put it). A unique U-shaped mounting support bracket can be attached to the side of any machine you like with two self-taping screws (included).
Put one on your Mark 7 or Mark V headstock for drilling, drum sanding, routing, shaping or lathe turning. Order extra brackets for your strip sander, bandsaw, belt sander and scroll saw so you can move your lamp from machine-to-machine by merely slipping the U-shaped mount into the brackets, as shown at left. Full installation instructions included.
Save when you order the three utility light set.
555503 Shopsmith Utility Light ... $69.71
555557 (3) Shopsmith Utility Light Set ... $212.59
Buy extra support brackets so you can move your light from machine to machine.
555520 Extra Support Bracket ... $10.92
Optional 2X Shade-Mounted Magnifier
Get a close-up view of small projects or tolerance-critical processes with the 2X power magnifier. It attaches to the shade of the Shopsmith's utility light. It's perfect for zooming in to get a super-clear view of miniatures and similar small projects -- or any tolerance-critical operations. The 2" deep by 4" wide premium-quality, high-clarity glass lens provides a larger field of view and resists scratching.
522200 Shade-Mounted Magnifier ... $29.82
Shopsmith Utitlity Light -- T-Track Version
This special fence light kit includes a Shopsmith Utility Light (555503) and a special bracket for mounting it quickly to the T-Track on the top of your Mark 7 or Mark V's rip fence or the T-Slots in your work table surface (Mark 7 and Mark V Models 505, 510 and 520 only).
Can also be used with later model Shopsmith bandsaws and bandsaw fences, and the Shopsmith router table kit. Just slide the bracket into position and lock with a quick twist to hold and aim your utility light exactly where you need it.
555806 T-Track Utility Light (includes light and bracket) ... $78.43
521787 T-Track Light Support Bracket Only ... $24.89
Order on the Web or by Phone, if you prefer --
Call before 4:30 PM Eastern Time
Copyright © 2017 RLFShop LLC-Shopsmith All rights reserved.