Kreg 20" Premium Bandsaw Fence
Get added precision and control with the 20" Kreg Bandsaw Fence System
Give your Shopsmith Bandsaw added Precision and Control with this 20" Kreg Fence System
Kreg Bandsaw Fence System
Designed exclusively for the Shopsmith Bandsaw, this fence system features rugged aluminum rail extrusions that attach quickly to the existing holes on the underside of your Shopsmith Bandsaw table with self-tapping bolts (included).
Once attached, you'll have a 20" long by 2-3/4" high precision rip fence with a convenient direct-reading scale that locks firmly into position with a single knob to help accurately and quickly rip stock up to 9-3/8" wide. That's 4-3/8" wider than our regular bandsaw rip fence.
In addition, the face and top surfaces of this fence offer convenient, pre-formed T-slots that will accept Shopsmith's flip stops, featherboards and utility lights - or your choice of special shop-made jigs and fixtures, using our special T-Nuts.
The Fence can also be laid down and attached to the mounting head horizontally for those situations where you may wish to resaw or rip thinner stock. This approach allows you to get your bandsaw blade guides down lower during such operations.
Includes: • Mounting rail and hardware • Front and rear fence supports and • Premium bandsaw fence
Note: Works with current model Shopsmith bandsaws or older models that have been upgraded with our aluminum worktable. Not for use on older model Shopsmith Bandsaws with cast iron worktables.
556030 Kreg Bandsaw Fence System ... $183.74
Deluxe Bandsaw Fence System
Get the complete system. Includes: Kreg Bandsaw Fence System • Micro-Adjuster and • Re-Sawing Guide.
556031 Deluxe Kreg Bandsaw Fence System
(Includes Kreg Fence System, Micro-Adjuster & Re-sawing Gudie) ... $220.47
556341 20" Premium Bandsaw Fence Only ... $59.95
522460 Mounting Rail & Hardware ...
(Item may be on back-order or is made upon ordering)
556032 Front & Rear Fence Supports ... $40.95
This special adjuster clamps quickly into the fence rail T-Slot with a large, comfortable knob. Then, simply loosen the fence mounting head and rotate the Micro-Adjuster's thumbwheel to gradually advance or retrieve the fence by 1/20" with each full rotation.
522511 Kreg Bandsaw Fence Micro-Adjuster ... $16.79
Fence Resawing Guide
4-1/2" tall resawing guide attaches to the T-Slot in the fence face. Its gently curved face allows you to follow a line that you've drawn down the top edge of the board you're resawing - allowing you to compensate for the blade lead as you go. The Pros all agree that these are clearly the best style resawing fences available.
522514 Kreg Bandsaw Fence Re-Sawing Guide ... $20.23
Order Toll-Free by Phone, if you prefer -- 1-800-543-7586
Copyright © 2014 Shopsmith All rights reserved.