Shopsmith Mark V Model 500 to Model 510 Upgrade
Enjoy Improved Workpiece Support and Control with this Model 510 Upgrade Package for Older Model 500 Mark V's.
If you're an earlier Mark V Model 500 owner and have been wanting a larger, more expandable table and fence system for added support and precision when working with large stock -- this is the upgrade for you.
You'll have over 8 feet of table width for handling even the longest boards. That's almost twice the 56" your Model 500 offers !
Inside the Mark V Model 510 Upgrade Kit:
- Larger Table with big 17-1/2" x 22" work surface. More support for ripping large sheets and cross-cutting long boards.
- Larger Rip Fence is 24-1/2" long x 1-3/8" thick with a single T-slot track on the top surface for mounting optional accessories such as: rip fence mounted feather board, T-track utility light kit and flip-up rip fence stop. A large butterfly handle locks the infeed end while a single lever locks the outfeed end with a quick flip
- Table Carriage with tilt locks at the front and rear and a widened tube stance for added stability. Carriage has quarter-turn locks. The hand wheel and lock move the table up and down - then secure it where you want it.
- Two Floating Extension Tables slide on tubes and lock anywhere between the main table and the end extension table
- Four 27" Connecting Tubes go through the rails and tie the system together with locking knobs
- Two Telescoping Legs give added support in the middle or at the ends of the connecting tubes. A quick twist locks their height
- See-Through Upper Saw Guard with etched-in depth-of-cut indicators, anti-kickback device and riving knife
- Lower Saw Guard, updated to accommodate Shopsmith's 12" sanding disc. Includes 2-1/2" dust port
Plus...You'll also get:
- Two-position Lathe Tool Rest Arm with lever-style adjustment screws and anti-rotation post
- Saw Table Insert
- Larger Extension Table Top (does not include vertical mounting tubes)
- Steel Miter Gauge Bar with T-slot washer
- Longer Sanding Disc Hub lets you use your current steel disc in the lower saw guard for dust collection
- 1-1/4" diameter saw arbor
- Instruction Manual, fully describing alignment, maintenance, safety, tips and techniques
- Special Alignment Set-Up Gauge
Note: Due to the increased size of the Model 510 table and how certain accessories connect to it, Some model 500 accessories may not fit the Model 510 upgrade. These include (but are not limited to) all table inserts, front table extension, rip fence, mortising hold-downs and some saw arbors.
555142 Mark V Model 500 to Model 510 Upgrade ...
(Item may be on back-order or is made upon ordering)
Order Toll-Free by Phone, if you prefer -- 1-800-543-7586
Copyright © 2015 Shopsmith All rights reserved.