phone  (800) 543-7586

Shopsmith Mark 7 Standard Accessories

A Full Complement Of Standard Accessories To Help You Get Started On The Road To Woodworking Success !

Standard Accessories

Shopsmith Mark 7 Standard Accessories
  1. Upper & Lower saw Guards - Includes built-in dust collection port & see-through upper guard with riving knife. Dual, cam-style pawls prevent kick-backs
  2. 10" All-Purpose Saw Blade - Premium quality, 50-tooth carbide-tipped blade for ripping & crosscutting
  3. Saw Blade Arbor & Wrench - Large, 1-1/4" diameter arbor is specially designed to provide added blade support & smooth-running operation
  4. Aluminum Rip Fence - Locks at both front & rear of table for precision ripping - also serves as a guide and/or backstop for drilling, sanding & other operations - offers two T-slots on top surface & one on each face of fence for attaching jigs & fixtures
  5. Miter Gauge - Squeeze-style safety grip clamps the workpiece firmly to the gauge bar for slip-free operation - protractor is accurate to 1/2°, with adjustable auto-stops at common angles - gauge bar slides in T-shaped table slots to prevent accidental drops & provide extended crosscutting capacity
  6. Extension Table System - Includes one base-mounted & two floating style tables with four connecting tubes & two telescoping legs for added workpiece support
  7. Shopsmith Safety Kit - Award-winning kit includes a push stick, a push block with anti-slip foam bottom, a fence straddling push block & an adjustable feather board
  8. Safety Goggles - Wrap-around style with ventilated sides - work over glasses
  1. 12" Sanding Disc & Sandpaper - Steel disc with 113 sq. in. of surface - Includes one pressure-sensitive, medium grit sandpaper disc
  2. Lathe Centers - Spurred drive center & cup-style dead center for turning
  3. Lathe Tool Rest - Slides into table carriage to provide support for lathe chisels during turning
  4. Lathe Tailstock - Adjustable mount holds dead center (or optional live center) during turning - Adjusts for offset turning such as Cabriole Legs
  5. Drill Chuck & Key - 1/2" capacity geared
  6. Allen Wrenches - The only tools you'll need to change operations
  7. Coupling Kit - Used to power Bandsaw, Jointer & other major accessories - includes one unbreakable Zytel Coupler & two drive hubs
  8. Shaper Arbor* - 1/2" arbor includes four assorted size rub collars
  9. Shaper / Router Shield* - Used for routing and under-table shaping- attaches to back of worktable & provides dust collection hook-up
  10. Shaper/ Router Table Insert* - Features 2-3/8" diameter center hole - includes two threaded starter pins for shaping & mounting holes on underside for shaper vacuum attachment (Vac attachment cannot be used during under-table shaping or routing
  11. 1/2" Router Chuck* - Precision-machined steel chuck accepts all Router Bits with 1/2" shanks

*Standard only with Mark 7 machines

Continue to Next Page...

Click here to request your Shopsmith Information Kit