phone  (937) 890-5197

Getting Ready To Use The Horizontal Boring Machine

Getting Ready To Use Your Shopsmith

Hello Again,

By now, you should have seen the the following steps in our special Getting Started in woodworking with your Shopsmith series, including our brand new Getting Started Videos. So far, you should have seen:  An Introduction & Welcome page;  A Getting to Know Your Machine page;  A Getting Ready to Use Your Machine page;  A Table Sawing page; and  A Drill Press page.

Today's Topic: The Shopsmith Horizontal Boring Machine

This topic is the third of seven in an information-packed series of machine-specific session highlighting the 7 primary woodworking tools. You will learn all about the capabilities of your Shopsmith Horizontal Boring Machine -- and then you will be taken through your first, fun-filled experience of using this unique, feature-packed Machine.

Start by watching our Getting Started in Woodworking Video then follow the 3 steps below

STEP 1: IDENTIFY THE HORIZONTAL BORING COMPONENTS YOU WILL NEED

Every Shopsmith Machine model comes equipped with a collection of components and accessories for each tool operation. But before you Get Started, we'll need to be sure you have the appropriate components for each machine you own. You might remember in our earlier topic, Getting to know your Machine, we helped you identify your Machine Model.

Select your Machine Model Below to find a list of all the components you will be needing for horizontal boring.

Once you have done that, gather the parts together that you will need for Horizontal Boring.

STEP 2: REVIEW THE 3-STEP APPROACH FOR ASSEMBLING AND SETTING-UP THE COMPONENTS YOU WILL NEED FOR HORIZONTAL BORING

Click Here For Step 2 - Setting Up

STEP 3: Now, let's drill some holes. The most basic horizontal boring operation is doweling two workpieces together to make a wider workpiece:

REVIEW THE 11-STEP Procedure for Doweling Two Workpiece Edges Together

Click Here For Step 3 - Doweling

See How Simple That Was!

Now that you've learned all about your Shopsmith Horizontal Boring Machine, you're ready to move on to the next Woodworking Operation -- using the Shopsmith 12" Disc Sander.

WANT MORE INFORMATION ON HORIZONTAL BORING? CLICK HERE!

Best Regards,

Robert Folkerth - President - Shopsmith

Robert Folkerth
President
Shopsmith

Getting Started

Welcome to Shopsmith. Please fill in this form and we'll send you more information about the Shopsmith MARK 7 and other woodworking topics.

First Name: Last Name:
Address:
Optional Extra Address Line:

City: ST: Zip:


Email:
Re-Enter Email Address:
Phone: ( ) -

NO - I do not yet own a MARK 7 or Mark V
YES - I own a MARK 7 or Mark V

Submit