phone  (937) 890-5197

STEP 2: ASSEMBLING THE DISC SANDER COMPONENTS YOU WILL NEED TO GET STARTED

To view a brief (few-seconds long) video clip of each step being performed click on this icon play video wherever you see it.

Step 1

With the machine in horizontal position, start by attaching the lower guard to the quill housing. Tighten it securely using the 5/32" Allen Wrench.

Open the two halves of the guard to their widest point, then lock the guard in this position. play video

Install Lower Guard

Install Lower Guard

Open Lower Guard

Open Lower Guard

Step 2

Next, attach the steel sanding disc to the spindle and use your 5/32" Allen Wrench to tighten it securely in position. play video

Install Sanding Disc

Install Sanding Disc

Step 3

Finally, position the table carriage so the edge of your work table is no farther than 1/8" away from the sanding disc if you will NOT be using the quill to feed the disc into your workpiece.

If you WILL be using the quill to feed the disc into the workpiece, this distance should be 1/2". play video

Position Work Table

Position Work Table

Step 4

Adjust the table height until its top surface is just above the disc centerline... and lock it into this position. play video

Adjust Table Height

Adjust Table Height

See How Simple That Was!

Now that you've located and assembled the components you'll need for Disc Sanding, CLICK HERE to use the disc sander to perform two basic disc sanding operations.

Getting Started

Welcome to Shopsmith. Please fill in this form and we'll send you more information about the Shopsmith MARK 7 and other woodworking topics.

First Name: Last Name:
Address:
Optional Extra Address Line:

City: ST: Zip:


Email:
Re-Enter Email Address:
Phone: ( ) -

NO - I do not yet own a MARK 7 or Mark V
YES - I own a MARK 7 or Mark V

Submit